Remote Electronic Air Cooler Controllers

  • Home
  • Remote Electronic Air Cooler Controllers
Product Image 1
Product Image 2
Product Image 2
Product Image 2
Product Image 2
Product Image 2
Product Image 2
Thumbnail Image 1
Product Image 2
Product Image 2
Product Image 2
Product Image 2
Product Image 2
Product Image 2

SARRU CC21 Air Cooler Remote Controller for 10 Steps Fan Motor Speed Regulation Maximum 300W, 6 Steps Water Pump Motor Settings, Sleep Mode and System ON/OFF Timer.

Remote Electronic Air Cooler Controllers

For Bussiness Enquiry Call to this Number

+91-9460706875
+91-8619622712


Categories: Remote Electronic Air Cooler Controllers

Sarru Automation CC21 desert air cooler remote controller provides 10 steps different comfortable fan speeds regulation. You can also set water pump motor at different 6 pre-programmed duty cycles ON-OFF settings to control the humidity level. This controller also provides you Sleep mode and ON/OFF timer. When sleep mode is turned ON the fan speed will be automatically reduce by 1 step in every 1 hour till it reaches to speed number 2. The timer can be set when system is in either ON or OFF condition. The timer value can be set in steps of 1 hour from 1 hour to 9 hours. Once set timer is over, cooler fan + water pump motor will automatically turn ON to OFF or OFF to reset ON. Controller keeps fan and pump settings stored in it s memory even power goes away. System can be fully controlled by remote buttons as well as fan, pump and system ON/OFF can also by controlled by controller panel three switches. Remote range is more than 30 feet in line of sigh. Fan circuit load capacity is max. 300 watt and water pump maximum capacity is 100 watt at 230V, 50Hz. All functions like fan speed, pump settings, timer value , sleep mode value are shown on display.

10 steps fan motor speed regulation.
6 steps water pump motor control.
Sleep mode and timer.
System can be controlled either by remote as well as by controller switches. Remote range more than 30 feet.
Controller keeps fan and pump setting stored in its memory even power goes away.
Do not install this controller along with old wiring. Make sure to remove the old wiring of fan and water pump form the circuit. Connect wires of fan and water pump directly to our controller and there should be no other wiring in-between.
System is compatible only with pure sine wave inverter.
All functions are shown on display.
Product box contain 1 Controller, 1 Remote(without battery) and 1 Manual. 12 months warranty.
Fan circuit load maximum capacity is 300 watt and water pump maximum capacity is 100 watt at 230V, 50Hz.

Chat with Us
×