SARRU FR1 CONTROLLER: It is a smart IR remote fan regulator with 9 steps speed regulation and on/off control, timer and sleep mode.
FAN REGULATOR: Fan regulator has 9 steps (1,2,3,4,5,6,7,8 and 9) speed regulations and on/off control. FAN TIMER: You can set timer off for 1 to 9 hours in 1 hour steps (1,2,3,4,5,6,7,8 & 9). The current timer value is shown on controller display. Once the timer is over the fan will automatically turned off. FAN SLEEP MODE: When this mode is active the fan speed will be automatically reduce by 1 step in every 1 hour till it reaches to speed number 2.
CONTROL: Fan can be controlled either by remote as well as by controller button switches. Remote range is more than 30 feet. INBULT NON-VOLATILE MEMORY: Controller keeps setting stored in its memory even power goes away. DISPLAY: All functions are displayed on 7 segment display. OPERATING VOLATGE: 230 VOLT, 50 Hz. CIRCUIT LOAD CAPACITY: 100 watt maximum. START INERTIA FIX : Fan always starts with full speed for a while even it is at low speed to overcome the startup inertia.
SHIPPING BOX CONTAINS: 1 controller, 1 remote, 1 quick start guide and 1 copy of invoice.
Do not install this controller along with old regulator. Please remove or bypass the old fan regulator.
System is compatible only with pure sine wave inverter.
WARRANTY: 12 months.
Product box contain 1 Controller, 1 Remote(without battery) and 1 Manual.
It is compatible with Anchor Roma, Hi-Fi and such 2 module plates.